A Pseudo-document-based Topical N-grams model for short texts

World Wide Web - In recent years, short text topic modeling has drawn considerable attentions from interdisciplinary researchers. Various customized topic models have been proposed to tackle the...     

高泉背斜地层压力测井多参数综合解释与异常高压成因

目前国内外地层压力测井解释方法较多,但大多数方法基于欠压实沉积理论并局限于单一的地层岩性,尤其是针对盆地边缘山前深层构造,单一测井参数确定地层压力误差较大,且无法解释沉积压实机制以外的异常高压。为此,将多种异常高压机制相关的测井参数进行综合解释,建立适合山前复杂构造的地层压力测井多参数计算模型,评价准噶尔盆地南缘高泉背斜高探1井的地层压力剖面,其计算结果与钻井实测数据吻合,相对误差小于3.00%.同时,基于原始沉积加载—卸载过程力学原理,利用地层压力测井多参数分析判别出高泉背斜深层各层系异常高压的形成机制。     

乌鲁木齐机场多普勒天气雷达故障统计分析

文章针对乌鲁木齐机场多普勒天气雷达(以下简称ADWR)2009~2019年发生的故障次数、故障分布以及备件更换情况,逐年统计故障率,深入分析了ADWR系统性能,总结出运行维护中的经验,就如何更好地提高雷达业务运行指标提出建议,以提高ADWR雷达的维护、维修能力,建立有针对性的备件管理,为科学的业务运行管理提供依据。     

耐压门C形密封圈大间隙密封性能分析与结构优化

采用有限元分析对耐压门C形密封圈密封结构进行计算分析和截面尺寸优化,计算校核典型算例下的密封性能,分析C形密封圈截面尺寸参数对其大间隙工况下密封性能的影响。结果表明:典型算例中C形密封圈结构在流体载荷增加的情况下,接触应力峰值也随之增加,并始终大于流体载荷,能够保证密封性能;大间隙密封工况下,C形密封圈截面开口半径、开口间隙和削斜高度对其密封能力影响显著。根据分析结果,优化了密封圈截面尺寸参数,优化后的密封结构在预紧压缩和大间隙工况下的密封性能均优于原始密封结构。     

Experimental Investigation of Heat Storage and Heat Transfer Rates during Melting of Nano-Enhanced Phase Change Materials (NePCM) in a Differentially-Heated Rectangular Cavity

In this work, an experimental study of melting heat transfer of nano-enhanced phase change materials(NePCM) in a differentially-heated rectangular cavity was performed. Two height-to-width aspect ratios of the cavity, i.e., 0.9 and 1.5, were investigated. The model Ne PCM samples were prepared by dispersing graphene nanoplatelets(GNP) into 1-tetradecanol, having a nominal melting point of 37℃, at loadings up to 3 wt.%. The viscosity was found to have a more than 10-fold increase at the highest loading of GNP. During the melting experiments, the wall superheat at the heating boundary was set to be 10℃ or 30℃. It was shown that with increasing the loading of GNP, both the heat storage and heat transfer rates during melting decelerate to some extent, at all geometrical and thermal configurations. This suggested that the use of NePCM in such cavity may not be able to enhance the heat storage rate due to the dramatic growth in viscosity, which deteriorates significantly natural convective heat transfer during melting to overweigh the enhanced heat conduction by only a decent increase in thermal conductivity. This also suggested that the numerically predicted melting accelerations and heat transfer enhancements, as a result of the increased thermal conductivity, in the literature are likely overestimated because the negative effects due to viscosity growth are underestimated.     

Effect of Bismuth on hydrogen storage properties of melt-spun LaNi4.7-x Al0.3Bix (x = 0.0, 0.1, 0.2, 0.3) ribbons

The LaNi₅ intermetallic compound is an AB5 type hydrogen storage alloy which exhibits low operating temperature, easy activation, low pressure and tolerance to impurities. In this study, LaNi_4.7-x Al_0.3Bi_x (x = 0.0, 0.1, 0.2, 0.3) alloys were produced by melt-spinning technique and the effects of Al and Bi additions on the microstructure, thermal and hydrogen storage properties of LaNi₅ were investigated. The results showed that substitution of Ni with Al led to a desired decrease in absorption/desorption plateau pressure and hysteresis without a decrease in hydrogen storage capacity. In contrast, Bi substitution with Ni increased the absorption/desorption plateau pressure, reduced the hydrogen capacity and increased pulverization resistance of the alloy due to the formation of BiLa and AlNi₃ intermetallic phases at the grain boundaries.     

In-situ preparation of cross-linked hybrid anion exchange membrane of quaternized poly (styrene-b-isobutylene-b-styrene) covalently bonded with graphene

Introducing graphene into polymer matrix is an effective way to enhance performances of anion exchange membrane (AEM). However, utilizing the advantages of graphene by physical approach is limited due to the weak interface interaction between graphene and polymer matrix. Herein, we report an effective strategy to covalently bond graphene with polymer matrix to improve the interface interaction and further to improve the properties of AEM. A series of cross-linked quaternized graphene-based hybrid AEM were fabricated by covalently bonding poly (vinylbenzyl chloride) grafted graphene (GN-g-PVBC) copolymer with chloromethyl functionalized poly (styrene-b-isobutylene-b-styrene) (SIBS) through the cross-linker (N,N,N′,N′-tetramethyl-1,6-hexanediamine) by in-situ synthetic approach. The interface interaction between graphene and QSIBS is greatly enhanced according to micromorphology characterization of the hybrid membrane. The cross-linked quaternized hybrid AEM containing 0.55 wt% of GN-g-PVBC exhibits obviously improved dynamical mechanical properties (storage modulus: 418 MPa), ion conductivity (1.81 × 10² S cm^?1), methanol barrier property (5.19 × 10^?7 cm² s^?1), selectivity (3.49 × 10⁴ S s cm^?3) at 60 °C and especially a comparably excellent chemical stability to that of Nafion 115 due to the enhanced interface interaction between graphene and the polymer matrix.     

不同煤层掘进工作面瞬变电磁法探测应用研究

煤矿井下瞬变电磁法成为煤矿井下超前探测工作的重要手段，在矿井水害预测预报上发挥着很大的作用。随着矿井上组煤层资源的逐渐枯竭，煤矿开采资源逐渐延伸向下组煤层。同一井田范围内同煤层及其顶底板的岩性特征一般相差不大，瞬变电磁法在同煤层施工过程中接收到的物理背景场较为接近；而不同煤层及其顶底板岩性特征通常会有较大的差别，瞬变电磁法在不同煤层施工过程中会接收到差别较大的物理背景场。当矿井存在多煤层开采时，通过大量数据研究瞬变电磁法在不同煤层巷道探测中的响应特征规律，分析并掌握不同煤层条件对瞬变电磁法探测结果的影响，能够提高瞬变电磁法在多煤层探测成果的准确性。     

喷射成形Al-Zn-Mg-Cu合金挤压态的组织和力学性能

研究了利用喷射成形辅以挤压制备Al-5.72Zn-2.36Mg-1.66Cu合金后优化的组织结构特征和力学性能。结果表明,合金基体组织均匀细化,晶粒形貌趋于圆整,平均晶粒大小达到10 μm左右。当合金的冷却条件通过快速凝固技术改变时,会产生不同程度的固溶强化效果和第二相弥散强化效果,从而改善了合金的整体性能。合金的屈服强度和抗拉强度分别平均提高了20%左右,且伸长率也略有提高。